MSO4012(100MHz 2ch Logic 16ch),MSO4014(100MHz 4ch Logic 16ch),
MSO4022(200MHz 2ch Logic 16ch),MSO4024(200MHz 4ch Logic 16ch),
MSO4032(350MHz 2ch Logic 16ch),MSO4034(350MHz 4ch Logic 16ch),
MSO4052(500MHz 2ch Logic 16ch),MSO4054(500MHz 4ch Logic 16ch)
특 징
▶ 100/200/350/500MHz 대역폭
▶ 아날로그 샘플링 속도 4GS/s, 디지털 샘플링 속도 1GS/s
▶ 아날로그 입력 2/4 채널
▶ 디지털 로직 입력 16 채널
▶ 아날로그 파형 갱신 속도 110,000wfms/s, 디지털 로직 파형 갱신 속도 85,000wfms/s
▶ 혁신적인 "UltraVision" 기술 적용
▶ 실시간 파형 기록, 저장 및 분석 기능 내장
▶ USB Host& Device, LAN(LXI-C), VGA, AUX, GPIB(Option : USB to GPIB Adaptor)
화 면
최대 파형포착속도 110kwfms/s
대용량메모리 및 파형밝기조절
실시간 파형기록, 재생, 분석
Serial bus 트리거 및 디코딩
아날로그신호와 디지털신호의 혼합 신호분석
Mask (Pass/Fail)기능
사 양
Model | MSO4012 / MSO4022 / MSO4032 / MSO4052 MSO4014 / MSO4024 / MSO4034 / MSO4054 |
Analog Channels | 2 or 4 |
Digital Logic Channels | 16 |
Frequency Bandwidth | 100/200/350/500 MHz |
Memory Depth | 140Mpts (analog), 28Mpts (digital) |
Waveform Acquisition Rate | 110,000wfms/s (analog), 85,000wfms/s (digital) |
표준부속품
▶ Power Cord conforming to the standard of the country
▶ 2 or 4 Passive Probes (500 MHz)
▶ 1 set logic analysis probe (for MSO)
▶ Quick Guide (Hard Copy)
Options
▶ UPA-DS : Power Analysis PC Software
▶ SD-RS232-DS4k : RS232/UART decording kit
▶ SD-I2C/SPI-DS4k : I2C/SPI decording kit
▶ SD-CAN-DS4k : CAN decording kit
▶ SD-Flexray-DS4k : Flexray decording kit
▶ Active Differental Probe (1.5 GHz)
▶ RM-DS4000 : Rack Mount Kit
▶ USB-GPIB : USB-GPIB Interface converter
▶ TekProbe Interface Adaptor
▶ USB Data Cable
F A Q
Request the Latest Firmware Click here and input information and we will get back to you with information on new firmware features and options available.
DS1000Z Deep Memory Data Collection Example UltraVision scope deep memory collection information
Square wave displayed as sine wave on an oscilloscope. A scope user attempting to view a square wave on an oscilloscope might view a sine wave of the same frequency in place of a square wave. This is not a necessarily a sign of a defect with the scope or the generator, however an effect of the constituent higher frequency harmonic
Where do I find instrument drivers for LabVIEW?
How do I configure a DS1000B Series Oscilloscope to return maximum data lengths? This note covers how to configure the DS1000B series of oscilloscope to return the maximum data length. This can be useful for storing to a USB memory stick.
Can you set up any RIGOL scopes to stop triggering after a specific averaging number? Not at this time. The average acquisition mode for the DS1000E/D, DS1000CA, DS1000B, DS4000, and DS6000 scopes are identical in function. They collect a boxcar average of the last acquisitions on a rolling basis.
When I plug in my instrument via USB, I get a Windows Page Fault error ( Blue Screen of Death / BSoD ). There is a known issue with the IVI VISA Shared components version. See attached document for more details.
Software Compatibility The attached PDF file describes Windows 7 Compatibility Issues.
VISA Runtime for Apple OS X To use a VISA compatible Rigol instrument under Apple OS X, the user must install National Instruments VISA run-time engine for OS X As of this writing the latest OS X VISA run-time engine from National Instruments is NI-VISA 5.0 NI-VISA 5.0 can be downloaded directly
What is the capacitance of the RP6150 and RP6150A passive probe? 1.6pF.
Help File Error: Navigation to web page cancelled. Some instrument manuals are compiled HTML files with extensions ending in .CHM. On occasion, they have shown "Navigation to web page cancelled". Here are some steps to help solve that error.
RP1300H Users Guide
RP2200 Users Guide
RP1050H Users Guide
RP5600 Users Guide
RP6150 Users Guide
Standard probes for all scopes Here is a listing of the standard probes that ship with each scope.
Why does my data not appear to have 8 bits of resolution? The displayed data is a subset of the actual total measurement range. This is mainly due to a smaller number of vertical pixels than bits available. See attached for more details.
Benefits of deep memory Modern oscilloscopes feature many powerful tools to help you get your job done. Here are some of the benefits of deep memory.
Bits vs. dBs Here are instructions on converting bits of resolution to dBs.
My Instrument IVI Driver does not appear in the LabVIEW tools palette. You may need to manually find and convert the IVI driver. See attachment for more details.
The instrument not recognized over the USB bus In some cases, an instrument may not be recognized over the USB bus. Here are some troubleshooting hints to help.
Are your products UL or CSA listed?
Rigol Scopes VISA Driver Installation / Rigol's UltraScope software not detect Rigol scope attached to PC via USB OR User receives "Run Time Error '48': File not found VISA32.DLL" error message when UltraScope is launched. The user either has not installed the latest available National Instruments VISA Runtime engine or the version of National Instrument’s VISA Runtime Engine included on the CD that the user installed is outdated. In both cases, the recommended solution is to visit National
RP3300A Users Guide
VB.NET basic instrument communication example Here is a short example on using National Instrument VISA and VB.NET to communicate with an instrument.
PyVISA example of instrument control via Python and NI-VISA A short example showing instrument communications using the PyVISA 1.4 VISA wrapper with Python 2.7.9 and National Instruments VISA layer.
Why does my DS series trigger rate slow down with failed waveforms in Pass/Fail mode?
When a waveform fails the pass/fail mask test, the trigger hold off is intentionally increased to give the observer time to see the failed waveform.
LAN Troubleshooting using PuTTY PuTTY is an open source network terminal emulator. It can be easily configured to help troubleshoot LAN connection issues to instrumentation.
NationalInstruments.Common and NationalInstruments.VisaNS are not being found with .NET
Go to Solution Explorer, right click on the file of interest (NationalInstruments.Common or NationalInstruments.VisaNS) and change Specific Version to False.
What data set size is used to calculate the FFT on the DS series of scopes? The FFT is calculated using the displayed data set. DS1000E/D/B/CA series scopes = 600 Data points DS1000Z Series (Displayed) = 1200 (Memory) = 16,384 DS2000 Series = 2048 points DS4000 series = 2048 points DS6000 series = 2048 points
Why do digital scopes appear noisy? Dave Jones, of EEVBlog, explains why digital scopes appear noisier than their Analog counterparts.
Firmware update troubleshooting Tips Here are some tips if you are having issues updating the firmware on a Rigol product.
Direct waveform transfer from a DS scope to a DG4000 generator You can directly transfer any waveform captured on a DS series scope to a DG4000 generator using a USB cable and a few easy steps. See attached for more details.
Application Note
Why can't I get a DSA battery and is there a workaround for portable use?
We are unable to import the Li-Ion batteries at this time. We recommend using a true sine wave inverter for portable use. See attached for performance data for a DSA800 while running on battery.